Miramar Fabric Flushmount

• Materials: fabric and metal
• Finish: Beige & White
• Dimensions: ∅ 17.7" x H 5.1" (Dia 45cm x H 13cm) — single size
• Light source: 3x LED bulb or Edison bulb, not included
• Bulb base: E26 or E27
• Mounting: semi-flush mount ceiling light
• Voltage: AC 110–240V
• Control: compatible with a standard wall switch (not included); no inline dimmer included
• Certifications: electrical standards compatible with North America, Europe, Australia, and Saudi Arabia
• Environment: indoor use only

Included

• Miramar Fabric Flushmount fixture (fabric shade with metal stem)
• Ceiling mounting hardware
• Note: light bulbs (three, E26/E27 base) are not included
• Note: fixture is controlled from a standard wall switch, which is not included; no separate dimmer module is included

The Miramar Fabric Flushmount pairs a tailored, segmented fabric shade with defined piped detailing over a clean metal stem, adding a soft, tactile layer to a ceiling fixture.

The fabric-and-metal construction keeps a low-profile, semi-flush silhouette so it grounds a room without visual weight, finished in a Beige & White colorway that suits a California-casual, warm minimalist aesthetic.

It runs on AC 110–240V and is compatible with North America, Europe, Australia, and Saudi Arabia electrical standards, and pairs with a standard wall switch (not included).

This is a hardwired semi-flush mount ceiling light for indoor use and should be installed at an existing ceiling electrical box by a qualified electrician or experienced installer.

1. Turn off power to the circuit at the breaker box.
2. Confirm the ceiling electrical box and mounting bracket can support the fixture's weight.
3. Attach the mounting bracket to the electrical box.
4. Connect the fixture wiring to the household wiring, matching wire colors, and secure with wire nuts.
5. Secure the fabric shade against the ceiling so the fixture sits low-profile and flush.
6. Install three E26/E27 base bulbs (not included).
7. Restore power and test the fixture from its wall switch.

Once wired in, the fixture is operated from a standard wall switch (not included); use dimmable bulbs and a compatible dimmer switch if dimming is desired, as no inline dimmer is included.

How many bulbs does the Miramar Flushmount use?

It uses three E26/E27 base bulbs (LED or Edison), not included.

What is the shade made of?

A tailored, segmented fabric shade with piped detailing, set on a metal stem.

What color is this fixture?

It comes in a Beige & White finish.

Is this a flush or semi-flush ceiling light?

It's a semi-flush mount, with a low-profile design that sits close to the ceiling.

Is it dimmable, and what control does it use?

The Miramar is operated from a standard wall switch (not included); it does not ship with a built-in dimmer, so dimming depends on using dimmable bulbs with a compatible wall dimmer.

Will this work with my home's electrical standards?

Yes — it runs on AC 110–240V and is compatible with North America, Europe, Australia, and Saudi Arabia electrical standards.

The Miramar's fabric shade and metal stem call for gentle, regular care to keep the piped detailing and finish looking crisp.

• Turn off and allow the fixture to cool before cleaning
• Dust the fabric shade with a soft, dry cloth or a low-suction vacuum brush attachment
• Wipe the metal stem with a soft, dry cloth
• Avoid liquids, solvents, and abrasive cleaners on the fabric shade
• For indoor use only