Ripple Glass Flushmount

• Primary Material: Metal frame with clear hammered glass drum shade
• Shade: Clear hammered glass, hand-textured for a water-ripple light effect
• Finish Options: Brushed Brass, Oil-Rubbed Bronze, Matte Black
• Frame: 3-arm metal support frame
• Light Source: 2 x E26 medium-base bulbs, up to 40W each (bulbs not included)
• Mounting Type: Semi-flush mount, hardwired
• Dimmable: Yes, with a compatible dimmer switch
• Location Rating: Dry/Damp
• Sloped Ceiling: Not compatible
• Certification: UL Listed/ETL
• Assembly: Required
• Fixture Weight: 1.8 kg (approx. 4 lb), all finishes

Included

• Ripple Glass Flushmount fixture with 3-arm metal frame
• Clear hammered glass drum shade
• Mounting bracket, canopy, and hardware

Not Included

• Light bulbs (2x E26 medium-base, up to 40W each)

The Ripple Glass Flushmount is built around a wide clear hammered glass drum shade. Its textured, hand-worked surface catches and scatters light into a water-ripple pattern across the ceiling and walls when the fixture is lit.

A 3-arm metal frame supports the glass shade from below and is available in brushed brass, oil-rubbed bronze, or matte black, pairing the organic texture of the glass with a durable metal structure built for everyday use. The oil-rubbed bronze finish is offered as an exclusive value option alongside the brass and black finishes.

The Ripple Glass Flushmount is a hardwired semi-flush mount ceiling fixture and should be installed by a qualified electrician with the power disconnected at the breaker. It is not adaptable for sloped ceilings.

1. Turn off power to the circuit at the breaker box.
2. Confirm the ceiling electrical box can support the fixture and mount only on a flat (non-sloped) ceiling.
3. Attach the mounting bracket to the ceiling electrical box.
4. Connect the fixture wiring to the household wiring per the included instructions.
5. Secure the hammered glass shade to the 3-arm frame.
6. Install two E26 medium-base bulbs (sold separately), up to 40W each.
7. Restore power and test, including dimmer compatibility if using a compatible dimmer switch.

How many lights does this fixture use?

It's a 2-light fixture using E26 medium-base bulbs, up to 40W each (bulbs not included).

What finish options are available?

Brushed Brass, Oil-Rubbed Bronze (offered as an exclusive value option), or Matte Black.

Can it be used on a sloped ceiling?

No, this fixture is not adaptable for sloped ceilings.

Is it dimmable?

Yes, it has dimmable capability when paired with a compatible dimmer switch.

Where can it be installed?

It carries a Dry/Damp location rating and is hardwired, UL Listed/ETL certified — suitable for entryways, hallways, kitchens, bedrooms, stairwells, bathrooms, or living areas.

Are bulbs included with the fixture?

No, bulbs are not included unless otherwise noted. The fixture takes 2 E26 medium-base bulbs, up to 40W each.

Can I use a lower-wattage bulb than the maximum listed?

Yes, the 40W figure is a maximum rating — lower-wattage compatible bulbs can be used.

Care for the Ripple Glass Flushmount focuses on keeping the hammered glass shade and metal frame free of dust and fingerprints.

• Turn off power and allow bulbs to cool before cleaning.
• Dust the glass shade and metal frame with a soft, dry cloth.
• For fingerprints or smudges on the glass, use a slightly damp cloth and dry immediately.
• Avoid abrasive or ammonia-based cleaners on the brushed brass, oil-rubbed bronze, or matte black finish, as they can dull the metal over time.