Vale Glass Pendant

• Style A: 10.6" diameter x 7" height
• Style B: 7.5" diameter x 8.3" height
• Style C: 9.8" diameter x 6.7" height

All three styles share the same hand-hammered glass dome shape and wood canopy — they differ only in overall scale, so the same mounting guidance applies to any size chosen.

The Vale Glass Pendant is a hardwired fixture rated for AC 110-240V, using a single E26-base bulb rated up to 40 watts — the bulb is not included.

All three sizes (Style A, B, and C) share the same single-light, E26 electrical configuration; only the overall glass dome dimensions change between styles.

The Vale Glass Pendant is a hardwired fixture and should be installed by a qualified electrician in accordance with local electrical codes, with power disconnected at the breaker before work begins.

1. Turn off power to the circuit at the breaker box and confirm with a voltage tester.
2. Before mounting, tape a paper outline of the pendant (or hang a lightweight template) at the planned height, then check the position from the doorway and from a seated position at the table.
3. Mount the ceiling bracket to the electrical box, positioned so the pendant centers over the table rather than the room, and stays clear of seated sightlines.
4. Connect the fixture wiring to the household wiring inside the junction box.
5. For dining table installations, hang the fixture 30-36 inches above the tabletop; only raise it higher than that range if your ceiling is taller than 8 feet, so the fixture still reads as connected to the table below.
6. If installing two smaller pendants side by side rather than one larger fixture, space the centers evenly and keep both outer fixtures inside the ends of the table.
7. Install an E26-base bulb (40W max), secure the canopy flush to the ceiling, and restore power to test.

If you need a custom hanging length for a non-standard ceiling height, contact support to confirm the specification before the fixture ships — length changes after delivery may involve an additional fee.

Because the shade is hand-blown and individually hammered glass, it should be cleaned gently rather than with abrasive tools.

• Turn off power and allow the bulb to cool before cleaning.
• Dust the glass dome with a soft, dry cloth or a microfiber duster.
• For fingerprints or light residue, wipe with a barely damp cloth and dry immediately — avoid soaking the glass or letting water sit in the hammered texture.
• Dust the wood canopy with a dry cloth; avoid household wood polishes or oils unless the finish is confirmed compatible.
• Avoid abrasive cleaners or scouring pads, which can scratch both the glass and the wood.